Reinforcement material is a kind of color powder chemical material specially used in the surface layer of concrete at the initial setting stage to stop colouring and strengthen. The problems of scattered coloring and wear on the surface of concrete are prevented, the decoration and durability of color cement are effectively improved, and the periodic maintenance cost is greatly saved. Colouring: It gives the concrete a rich color in the air, there are a variety of enhanced colors for customers to choose. Thus greatly improved the decorative embossing floor. Reinforcement: It and concrete soak into each other to form a whole. The super permeability makes the floor strength higher than the traditional concrete floor, and the wear resistance ratio is as high as 558%, which effectively prevents wear and fragmentation and prolongs the service life in the air.
The demoulding powder of color cement embossing construction method is a kind of colored waterproof light powder, which ensures the covering rate of concrete surface intact when embossing texture, and avoids the bonding phenomenon between mould and waste products. At the same time, it also provides the second color and combines with the basic color of the strengthening material, thus creating a natural and lifelike effect. Demoulding: It can be directly used for the exterior of floor strengthening agent before pressing. The moisture barrier layer is formed between the data tool (reinforcement agent, mould, etc.) and the concrete, thus softening the tool to play the demoulding process. Generally speaking, only 15 kilograms can cover up 100 square meters of imprinted floor, and the mold floor can be freely repeated demoulding, but will never destroy the appearance of color concrete. Secondary colouring: The matching application of demoulding powder and reinforcement can play a secondary colouring and maintenance role on the die floor. The reinforced material can give different colours to the moulded floor and produce a variety of composite effects. After hardening and dryness of concrete, the demoulding powder on the protruding part is washed away with water, and more colors are preserved in the deeper part. Thus, after twice coloring, the moulding floor will have a common artistic vision, reaching the plane effect of separating nature from classics.
The imprint floor sealant is a colourless and wear-resistant polymer specially designed to meet the needs of deep immersion. It can strengthen the density and hardness of the exterior surface of the moulded floor, and avoid the dry cracking of the moulded floor. Strength: When the sealant soaks into the crevice of concrete, it will replace the water on the surface and form a solid and insoluble silicate in the capillary pore, so that the base of the imprinted floor will set up a superhard maintenance layer similar to marble, the effect can be as long as 10-20 years. Dry crack prevention: due to the ultra-fine characteristics of the data, the concrete solidification is more uniform, which can avoid part of the dryness or cracking. Eternity produces no dust and no need to wax regularly for sustenance.