Environmental Requirements and Maintenance of Floor Coatings: Environmental Requirements for Epoxy Floor Coatings Construction: a. Surface Water Content of Base Floor: Non-aqueous Epoxy Floor cannot be constructed at 6% or above; B. Air Humidity: Construction should be stopped at 85% or above; C. Construction Temperature: Maintenance of Special Formula S Epoxy Floor Coatings: Epoxy Floor Coatings is a product with high value, high quality and high requirements. It needs careful maintenance and maintenance. Correct use method can keep air fresh and prolong service life. The measures are as follows:
Everyone who enters the workshop should change their shoes (so as not to bring the mud and sand outside into the workshop and scratch the air); this is hardware, whose feet should be wrapped with soft plastic or rubber to avoid scratching the air during operation; the stacking board should be lifted completely from the air; when turning, special attention should be paid to the corner of the stacking board to avoid scratching the air; when cleaning the air, soft mop or wet and dry two should be used. With vacuum cleaner, clean water or detergent can be used. Cleaning agent, but pay attention to air wet slippery; if wear or scratch occurs due to long use time, small area can stop local repair, if the area is large, it is recommended to re-roll or dysprosium coating once.
Notes for later maintenance of floor paint: soft broom or cloth can be used for daily cleaning; neutral detergent should be used for serious pollution; cloth should be washed with water first, then rinsed with water, dry, and coated with a thin layer of wax; chemical drugs such as acid and alkali should be cleaned in time when splashing artificial intelligence. R. Cloth should be used for spills such as spices and oils. Lubrication coatings can be regularly coated with bright wax. Maintain and maintain the lasting beauty of the floor.