The innovation of old epoxy flooring can be divided into two steps: liquidation and innovation of old epoxy flooring. First, it is necessary to liquidate the appearance of old epoxy flooring, including the peeling position of the flooring paint, scrape the paint film with knives or other tools, and then grind the surface with sandpaper. If there are empty drums and cracks in the air, we propose to fill them with epoxy mortar. After finishing the surface of the old epoxy floor, it can be coated with epoxy to make the surface of the epoxy floor smoother and brighter. Finally, a coat of epoxy flooring paint can be added.
日常养护环氧树脂地坪所需留意，搬运物品尽量做到轻。间内的环氧地坪上行车 要留意速度不可过快,以免争刹车行为形成剪切发热过高,从而使得环氧 地坪漆霎时软化 并在剪切力的作用下产生难以清洗的污痕。倡议行人穿软底鞋(若现场条件允许),进入工业地坪区前要清算洁净鞋底上的砂粒等硬质物,以 减少锐利物体对地坪外表的划伤。 举轻放,避免重物冲击空中,以免形成人为损坏。
Daily maintenance of epoxy floors need to pay attention to, as far as possible, light handling items. In order to avoid excessive shear heat caused by braking behavior, epoxy floor paint should be softened instantaneously and dirt hard to clean under the action of shear force should be avoided. It is advocated that pedestrians wear soft soles (if site conditions permit) and clean sand and other hard substances on soles before entering industrial floors to reduce scratches on the surface of floors caused by sharp objects. Lift and handle lightly to avoid heavy objects hitting the air, so as not to cause man-made damage.