1. When using concrete sealant curing agent, it can play a maintenance role, and after calcification reaction with concrete, the appearance of concrete sealant curing agent will not show some fine lines. Therefore, the use of concrete secretion test, can greatly improve its strength, can be used to test the water quality of concrete secretion not only does not contain harmful substances, will not extinguish, and non-toxic effects. The density of concrete sealing curing agent is comparatively high. Concrete secretion test can play a high wear resistance characteristics, and can improve the wear resistance to more than several times the original, concrete sealant curing agent can have chemical reactions with various substances. And in terms of building category, the appearance of concrete sealant curing agent will also play an energy-saving effect. It also plays a very important role.
2. The scientific and technological content of concrete sealing and curing agent is comparatively high, so in the process of application, concrete sealing and curing agent is also an indispensable commodity. When it can be used, according to the number of applications, it can be dissolved, and then directly immersed in the concrete material. Moreover, after forming a certain degree of hardness, its self-care effect is comparable and convenient. The concrete sealing and curing agent has good performance. Because the concrete sealing and curing agent has the characteristics of solidification, its hardness can be improved in a straight line, it can be fully immersed in concrete, and the thickness of the concrete sealing and curing agent can be stopped to encrypt, so the concrete is used closely. After sealing the curing agent, the effect is obvious. Therefore, in the use of time, can improve the strength of the air, concrete sealant curing agent has high strength and waterproof characteristics.
3，涂装底漆应留意如下要点：基材的前处置应严厉依照前述有关请求停止;底漆应涂布均与、完好，不应有漏除和堆积等现象; 应依照所用详细产品技术条件规则的枯燥时间和最佳涂装距离停止下道涂装的施工。 底漆要用专用稀释剂稀释，稀释剂的参加量不能超越总量的5%，应严厉依照相应的产品阐明书的涂装操作要点和标准操作。应严厉依照所用详细产品技术条件规则的主剂和固化剂的运用比例，配置底漆并充沛搅拌平均，如需求则放置熟化后施工。依据被涂物的材质选择适宜的底漆，总的选择准绳是地坪涂装需求采用自干型涂料，钢材外表需选用防锈(防霉)底漆，水泥外表需选用耐碱性能优秀的底漆;
3. Painting primer should pay attention to the following points: the pre-treatment of the base material should be strictly stopped in accordance with the aforementioned relevant requirements; primer should be coated in good condition without leakage and accumulation; the construction of downstream painting should be stopped in accordance with the dull time and the optimum painting distance of the detailed product technical conditions used. Primer should be diluted with special diluent. The amount of diluent can not exceed 5% of the total amount. It should be strictly operated according to the key points and standard operation of the corresponding product specification. Primer should be equipped and stirred equally according to the application ratio of main agent and curing agent according to the detailed product technical conditions. If required, it should be put in the construction after ripening. According to the material of the coated material, the suitable primer is selected. The general selection criterion is that the floor coating needs self-drying paint, steel surface needs rust (mildew) primer, and cement surface needs excellent alkali resistance primer.